Length | 350 mm |
Size/Diameter | 4 mm |
Brand | D&H |
Dia | 4 mm |
Material | Stainless Steel |
Operating Current | AC/DC |
Secheron 308L is stainless steel electrode for welding SS304, SS308 and its low carbon versions. The weld deposit displays good corrosion and crack resistance. It meets customer requirements economically. It works well with transformer having low OCV also with good re-striking characteristic. It has no red hot tendency within current range specified and no porosity. It is ideally suited for joining 18-8 stainless steels like AISI 304, 308 and its low carbon versions, etc. and their equivalent grades in cast variety. It is specially recommended for welding lower diameter pipes with 1 mm to 3 mm wall thickness / 1 mm to 3 mm thick plates used in stainless steel furniture, stairs and general fabrication.
ApprovalsCHEMICAL COMPOSITION OF ALL WELD METAL (%)
Element |
C | Mn | Si | P | S | Cr | Ni |
Percent |
0.045 | 0.80 | 0.75 | 0.040 | 0.020 | 18.5 | 8.9 |
MECHANICAL PROPERTIES OF ALL WELD METAL
UTS | Elongation |
(MPa) |
(L= 4d)% |
560 | 38.0 |
CURRENT AND PACKING DATA: AC / DC(+)
Size (mm) |
5x350 | 4x350 |
3.15x350 |
2.5x350 |
Current Range (Amps) |
150-180 | 110-140 |
80-110 |
60-80 |
Weight / Carton (kgs) |
2.0 |
2.0 |
2.0 |
2.0 |
Length | 350 mm |
Size/Diameter | 3 mm |
Brand | D&H |
Dia | 3.15 mm |
• Stainless steel electrode for welding of similar and dissimilar steels.
• The weld deposit displays good corrosion, scaling resistance and crack resistance.
• It meets customer requirements economically.
• It works well with transformer having low OCV also.
• It is ideally suited for welding similar alloys in wrought or cast form.
• It can also used for welding dissimilar metals, such as joining SS304L to carbon. steel, welding the clad side of SS304L clad steels, and applying stainless steel sheet lining to carbon steel shells.
Approvals
CE